Street Ace boots are not only durable, but they’ll protect your feet from whatever the world throws your way. The thick PU wedge sole is durable and slip-resistant. The long 9″ shaft adds extra protection for your ankles and calves. Solace Street Ace are ankle-height boots with a padded collar that keeps your ankles comfortable and supported.

The insole and toe box have been designed to keep that feel of shifting a gear close to proper motorcycling boots.

Safety features

Premium abrasion resistant full grain leather
CE certified to EN ISO 20345 standard
9 inches tall with high density foam lining for ankle safety
Steel toe protection with improved dexterity for precise gear-shift feel, 20.39 kgf (200J) steel toe caps
Double stitching on whole upper areas
Stiffened heel counter
Comfort features

Comfortable sweat-resistant EVA insole with low bounce-back for precise shift feel and cushioned heel support
Lace-free with hook and loop (velcro) closure
Flexible accordion at front tongue part for mobility
SRC tested∗ slip-resistant double density PU sole for high grip
Rockport lining as per EN standard
Leather gear shifter patch
∗SR stands for Slip Resistant, C describes the material the slipping is tested on (in this case it has been tested on ceramic tiles) thus the C. The testing is done by pouring oil, soap solution and glycerine.

More features

Reflectives piping from side to back
Soft and comfortable inner lining
Genuine YKK zippers
Classic pit-boss styling
Care instructions

Dry the boots properly before storage
Wipe boots with a rag or horsehair shoe-brush after usage in dirty conditions
Use a quality leather-moisturizer or balm from time to time
What if the boots get wet ?

While keeping it dry is important, there’s always a chance of the boots getting soaked in water. If that happens it is critical that you avoid the temptation to speed up the drying process. Do not leave them next to a fire, or another type of external heat source. High heat can cause the leather to dry too quickly which can cause irreparable cracks to form.
The one safe step you can take to help wet boots dry out faster is to remove insoles (if possible) and stuff the boots with dry, crumpled-up paper towels or newspapers. Every few hours replace the paper as it becomes damp.
Otherwise, be patient and allow your boots to dry naturally at room temperature.

Street Ace boots have been designed to better the hiking/mesh shoes used by motorcyclists in India and offer raised levels of safety compared to those shoes at a similar pricing. The insole is designed for low-bounce for keeping that feel of shifting a gear close to proper motorcycling boots. Riders should note that our motorcycle specific boots offer much higher protection due to a much focused design. We at Solace Motorcycle Clothing Co. believe transparency and knowledge to the end consumer to be of utmost importance.

MADE IN INDIA

The post SOLACE STREET ACE BOOTS first appeared on kmmonline.

The Forma low cut adventure boots come with a leather upper and memory foam that make it the perfect pair for the adventure tourer. Its comfortable, low cut and you can get through rough terrain with them.

Features:

Outer

Full-grain oil treated leather upper
Specific adventure/enduro/atv-quad double density compound rubber sole
Injection moulded plastic protections
Plastic gear pad protection
Adjustable velcro closure
Replaceable/adjustable GH plastic buckles

Inner

Personalized Forma Drytex tubular lining (waterproof and breathable)
Ankle TPU moulded plastic protections
Soft polymer padding with memory foam
PP Mid Dual Flex with anti-shock EVA midsole
Anti-bacterial replaceable footbed with A.P.S. (Air Pump System)
Air is pumped from a specific centralized position in the A.P.S perforated footbed to the entire insole: consequently, air circulation within the boot keeps feet cool and comfortable.
CE certificate

The post FORMA ADVENTURE RIDING BOOTS (LOW) BLACK first appeared on kmmonline.

When riding boots are a little too much and street shoes just don’t cut it, the Forma Viper riding shoes bridge the gap. Every aspect of the Viper Boots has been designed to offer superior comfort and control. The upper is constructed from a combination of microfiber and leather with a double density rubber sole to grip the pegs and the asphalt.

Features:
Microfiber and leather upper
Double density rubber sole
Personalized ankle and front micro-injection protections
Gear pad protection
Padded tongue and collar
Lace and adjustable VELCRO® brand closure
Rear pull loop
Rear reflective insert
Waterproof and breathable Drytex tubular lining
Ankle TPU molded plastic protection
Soft polymer padding with memory foam
PP Mid Dual Flex with anti-shock EVA midsole
Personalized anti-bacterial replaceable EVA footbed
CE level protection

The post Forma Viper Boots first appeared on kmmonline.

The Forma low cut adventure boots come with a leather upper and memory foam that make it the perfect pair for the adventure tourer. Its comfortable, low cut and you can get through rough terrain with them.

Features:

Outer

Full-grain oil treated leather upper
Specific adventure/enduro/atv-quad double density compound rubber sole
Injection moulded plastic protections
Plastic gear pad protection
Adjustable velcro closure
Replaceable/adjustable GH plastic buckles

Inner

Personalized Forma Drytex tubular lining (waterproof and breathable)
Ankle TPU moulded plastic protections
Soft polymer padding with memory foam
PP Mid Dual Flex with anti-shock EVA midsole
Anti-bacterial replaceable footbed with A.P.S. (Air Pump System)
Air is pumped from a specific centralized position in the A.P.S perforated footbed to the entire insole: consequently, air circulation within the boot keeps feet cool and comfortable.
CE certificate

The post FORMA ADVENTURE RIDING BOOTS (LOW) BROWN first appeared on kmmonline.

Stylish Riding boot for the adventurer in you.

Features

Outer

Full-grain oil treated leather upper

Specific adventure/enduro/atv-quad double density compound rubber sole

Injection moulded plastic protections

Plastic gear pad protection

Adjustable velcro closure

Replaceable/adjustable GH plastic buckles

Inner

Personalized Forma Drytex tubular lining (waterproof and breathable)

Shin and ankle TPU moulded plastic protections

Soft polymer padding with memory foam

PP Mid Dual Flex with antishock EVA midsole

Anti-bacterial replaceable footbed with A.P.S. (Air Pump System)

Air is pumped from a specific centralized position in the A.P.S perforated footbed to the entire insole: consequently, air circulation within the boot keeps feet cool and comfortable.

CE certificate

The post FORMA ADVENTURE RIDING BOOTS (HIGH) first appeared on kmmonline.

Ankle Boots provide Superior Safety, Security, Style for your feet and ensures a comfortable ride on both the road and the track. Our Ankle boots provides a high level of protection through molded TPU shin, ankle and heel protection and BB boots feature an anti-slip multi density sole, ensuring excellent grip on the foot pegs.

So if you’re racing, or just riding your bike on the road, always the Ankle Boot is the one you need.!

NOTE – The boots are made of High Quality Leather to give you maximum protection during crashes. They are NOT meant to provide Waterproof protection, Kindly do NOT use them in Rains or touch with Water. Any contact with Water will make the Leather peel off and destroy the boots. Warranty won’t apply

Description
TECHNICAL SPECIFICATIONS

Made of High quality Premium Microfiber leather boot upper construction with durable soles designed for improved riding feel.
Contoured shin plate protectors are injected with high modulus TPU Protectors on Shin, Ankle and Heel for superior impact and abrasion resistance.
Biking Brotherhood’s unique multi-linkcontrol system provides advanced external protection and support for ankle articulation, limiting hyper-torsion, hyper-extension and hyper-flexion as well as providing Achilles and ankle impact protection
Advanced Air tech inner inning for higher level of breathing.
TVS back counter ankle protection
Mcs toe protection system.
Inner Lacing system
Stainless Steel Toe sliders for Maximum protection while cornering.
Gear Shift Panel for protection & rigidity while shifting gears.
Reflective piping for night visibility
Heavy duty YKK Zipper.
Front and rear asymmetrical accordion stretch zones for maximum comfort and improved safety.
NOTE – The boots are made of High Quality Leather to give you maximum protection during crashes. They are NOT meant to provide Waterproof protection, Kindly do NOT use them in Rains or touch with Water. Any contact with Water will make the Leather peel off and destroy the boots. Warranty won’t apply

The post BBG Ankle Boot – Black first appeared on kmmonline.

Calf Boots provide Superior Safety, Security, Style for your feet and ensures a comfortable ride on both the road and the track. Our calf boots provides a high level of protection through molded TPU shin, ankle and heel protection and BB boots feature an anti-slip multi density sole, ensuring excellent grip on the foot pegs.

So if you’re racing, or just riding your bike on the road, always the Calf Boot is the one you need.!

NOTE – The boots are made of High Quality Leather to give you maximum protection during crashes. They are NOT meant to provide Waterproof protection, Kindly do NOT use them in Rains or touch with Water. Any contact with Water will make the Leather peel off and destroy the boots. Warranty won’t apply.

Description
TECHNICAL SPECIFICATIONS

Made of High quality Premium Microfiber leather boot upper construction with durable soles designed for improved riding feel.
Contoured shin plate protectors are injected with high modulus TPU Protectors on Shin, Ankle and Heel for superior impact and abrasion resistance.
Biking Brotherhood’s unique multi-linkcontrol system provides advanced external protection and support for ankle articulation, limiting hyper-torsion, hyper-extension and hyper-flexion as well as providing Achilles and ankle impact protection
Advanced Air tech inner inning for higher level of breathing.
TVS back counter ankle protection
Mcs toe protection system.
Inner Lacing system
Stainless Steel Toe sliders for Maximum protection while cornering.
Gear Shift Panel for protection & rigidity while shifting gears.
Reflective piping for night visibility
Heavy duty YKK Zipper.
Front and rear asymmetrical accordion stretch zones for maximum comfort and improved safety.

The post BBG Calf boot – Neon first appeared on kmmonline.

The newly redesigned Fly Racing Dirt Maverik Boots are every bit as protective as the previous version while maintaining a comfortable price point for the entry level rider. The reimagined sole keeps the weight down and offers impressive grip. Much like the FR5 Boots, the Maverik Boots also employ a brand new 4-stage sole design. Stage one is a perforated plush insole resting above the innovative second stage, an injected midsole with a unique fishbone design which is lightweight yet incredibly strong. The durable mid-sole is then further enhanced by the addition of a rigid in-mold flex reducing steel shank. Stage three is a fishbone foam layer designed to transfer shock and vibration which is then encased in the final stage, an anti-vibration molded traction sole.
Features:
• 3D plastic shift panel with added grooves and texture to save your boots from premature wear
• Pre-shaped molded plastic 3D shin for added impact resistance and comfort
• 4-stage high-grip sole design
• Outsole rubber compound provides high levels of grip and durability
• Articulated rear ankle provides subtle flexibility while remaining supportive
• Innovative single-piece plastic injected fishbone midsole
• Inner ankle panel made of durable and flexible plastic
• Adjustable quick-lock 3 buckle closure system
• Rubber heat shields on bike facing sides of each boot
• CE Approved to EN13634:2015

The post Fly Racing Dirt Maverik Boots Black-White first appeared on kmmonline.

The newly redesigned Fly Racing Dirt Maverik Boots are every bit as protective as the previous version while maintaining a comfortable price point for the entry level rider. The reimagined sole keeps the weight down and offers impressive grip. Much like the FR5 Boots, the Maverik Boots also employ a brand new 4-stage sole design. Stage one is a perforated plush insole resting above the innovative second stage, an injected midsole with a unique fishbone design which is lightweight yet incredibly strong. The durable mid-sole is then further enhanced by the addition of a rigid in-mold flex reducing steel shank. Stage three is a fishbone foam layer designed to transfer shock and vibration which is then encased in the final stage, an anti-vibration molded traction sole.
Features:
• 3D plastic shift panel with added grooves and texture to save your boots from premature wear
• Pre-shaped molded plastic 3D shin for added impact resistance and comfort
• 4-stage high-grip sole design
• Outsole rubber compound provides high levels of grip and durability
• Articulated rear ankle provides subtle flexibility while remaining supportive
• Innovative single-piece plastic injected fishbone midsole
• Inner ankle panel made of durable and flexible plastic
• Adjustable quick-lock 3 buckle closure system
• Rubber heat shields on bike facing sides of each boot
• CE Approved to EN13634:2015

The post Fly Racing Dirt Maverik Boots Black-Red first appeared on kmmonline.

The newly redesigned Fly Racing Dirt Maverik Boots are every bit as protective as the previous version while maintaining a comfortable price point for the entry level rider. The reimagined sole keeps the weight down and offers impressive grip. Much like the FR5 Boots, the Maverik Boots also employ a brand new 4-stage sole design. Stage one is a perforated plush insole resting above the innovative second stage, an injected midsole with a unique fishbone design which is lightweight yet incredibly strong. The durable mid-sole is then further enhanced by the addition of a rigid in-mold flex reducing steel shank. Stage three is a fishbone foam layer designed to transfer shock and vibration which is then encased in the final stage, an anti-vibration molded traction sole.

Features:
• 3D plastic shift panel with added grooves and texture to save your boots from premature wear
• Pre-shaped molded plastic 3D shin for added impact resistance and comfort
• 4-stage high-grip sole design
• Outsole rubber compound provides high levels of grip and durability
• Articulated rear ankle provides subtle flexibility while remaining supportive
• Innovative single-piece plastic injected fishbone midsole
• Inner ankle panel made of durable and flexible plastic
• Adjustable quick-lock 3 buckle closure system
• Rubber heat shields on bike facing sides of each boot
• CE Approved to EN13634:2015

The post Fly Racing Dirt Maverik Boots -Black first appeared on kmmonline.