The H2Go Rain Jacket is purpose-built with one single objective, to keep you dry when you are riding in the rain.

As much as motorcyclists love riding in the monsoons, we hate getting wet even more. We want to experience the lush greenery, the wet tarmac and the smell of fresh Earth that monsoon brings; but we want to do it dry. The H2Go Rain Jacket is the answer.

Description:-

Performance

• 10000mm Water Resistance: The shell is made from a fabric rated for water resistance up to 10000mm, perfect for Indian monsoons on a motorcycle.
• Double Ripstop Polyester: The Double Ripstop weave of the abrasion-resistant polyester shell prevents small tears from spreading and lengthens the life of the jacket
• Hi-Viz Green Shell: When it rains heavily, visibility typically goes down. The hi-viz green shell of H2Go keeps you visible to oncoming traffic.
• Retro-Reflective Trims: Sometimes, you need to continue riding after dark. The retro-reflective trims light up in the headlight of oncoming traffic and keep your visible

Construction

• Made for Motorcycling: The jacket is engineered, cut and sized to be worn easily over a riding jacket.
• Independent Destination Jacket: The H2Go can also be worn as an independent rain jacket.
• Pre-Curved Arms: Ideally pre-curved for the riding posture, the snugger fit of the arms reduces wind resistance and prevents fatigue.
• Heat Sealed Seams: Precision sealed seams prevent ingress of water at the seams and keep you dry.
• YKK Aquaguard Zipper: 100% waterproof YKK Aquaguard zipper, backed by a wide gutter flap lets you wear the jacket easily and keeps you dry once the jacket is zipped up.
• 3 Panel Hood with Cord Lock: 3 panel design makes the hood compact and ergonomic. Cord Lock lets you cinch the hood to your preference.
• Independently Actuating Hood:  The hood actuates independent of the collar and provides more flexibility for head movement

Comfort

• Rear Exhaust Vents: Inverted rear exhaust vents on the shoulder blades assist in removal of hot and humid air from inside the jacket, and keep you cool and dry.
• Cord Lock On Hem: Cord Locks on the bottom, on either side, let you adjust the fit of the jacket to your preference.
• Gloves Friendly Cuffs: Elasticated cuffs with forearms wide enough to fit over gloves lets you easily pull the sleeves of H2Go over your riding jacket and gloves.
• High Collar: Height of the collar designed to prevent capillary water ingress while riding, from under the chin of the helmet.
• Extremely Lightweight: Weighs only 200 gms

Other Features

• Stow-away Pouch: Sleek drawstring pouch lets you store the rain jacket during transport

Wear over a Riding Jacket

• Rynox H2GO Pro 2 Rain Jacket is primarily designed and sized to be worn over a riding jacket. To wear the H2Go over a riding jacket, select the same size as the size of your riding jacket

Wear Directly Over Body

• If you intend to wear the H2Go exclusively without a riding jacket, we recommend selecting 1 size smaller than the size of your riding jacket. Alternatively, refer to the size chart of any of our jackets, pick your size of the riding jacket, and then select 1 size smaller for the Rynox H2GO Pro 2 Rain Jacket.

Points to Note

• The H2Go Rain Jacket is engineered to be worn over a riding jacket. The cut, shape, and paneling of the H2Go Rain Jacket work best in your favor only when worn over a riding jacket.
• While the Rynox H2GO Pro 2 Rain Jacket can be worn directly over the body, its cut, shape, and paneling are not optimized to be worn in such a way

Warranty:- 6 Months, handled by Team Rynox

Sizing guide for the RYNOX H2GO RAIN JACKET:

The post RYNOX H2GO PRO 2 RAIN JACKET AQUA BLUE first appeared on kmmonline.

• The Rynox H2Go Evo Waterproof Socks with Drylock technology is 100% waterproof!
• Drylock watertight barrier makes this sock completely submersible in water.
• The Rynox H2Go Evo Waterproof Socks are made from bamboo fiber and have anit- bacterial and anti odour properties
• Now, with Rynox H2Go Evo Waterproof Socks, keep your feet dry on all your monsoon adventures

Size Chart:

Height of socks: 35-37 cm

Performance:

• Drylock Waterproof Technology:A 100% waterproof Drylock watertight barrier will prevent water ingress as long as a secure seal is maintained in your feet. This lets you submerge the socks completely under water and still prevent water ingress.
• Drycore Waterproof Technology:A 100% waterproof hydrophobic polyurethane (PU) membrane sandwiched between the inner and the outer layers keeps water out. Rated for water resistance of >20,000mm (Hydrostatic Head Test).
• Breathable Construction:The same Drycore waterproof membrane that keeps water out assists in sweat and condensation management. The specialised construction of the waterproof membrane passively allows water vapour to diffuse through, but prevents water ingress; keeping you dry and cool at the same time.
• MODULAYER Performance Layering System:Essentially, the H2Go socks are a modular, independent waterproof layer for your feet. Unlike the integrated waterproof membrane in waterproof boots, you now have true freedom to choose when and how to add a waterproof layer.

Materials and Construction:

• Made for Motorcycling:The length/height of the H2Go Evo socks is designed specifically to be worn with even the tallest protective motorcycle boots, and keep your shin and calf free from chafing against the boot entry.
• Tough Outer Layer:Made from a specialised blend of nylon, and Elastane, the outer shell is designed to resist wear and increase the service life of the socks.
• Inner Layer:Made from a combination of Bamboo Fiber (70%) and Nylon (30%), the inner layer is designed for maximum comfort and blister-free use. Bamboo Fiber ensures long-term freshness. The microscopic holes in Bamboo Fiber offer excellent ventilation and long term freshness. The antimicrobial properties of Bamboo Fiber help in suppress the growth of bacteria and resisting the foul odour of sweat.

Comfort:

• Compression Fit:Ergonomically moulded knit with 4-way stretch ensures the socks stay in place on your feet while providing an active fit.

Waterproof and Watertight

• Length/Height of the Socks:35 – 37 cm (Height might vary according to size of the socks) (top of entry to corner of heel)
• Length/Height of Drycore Waterproof Membrane:35 – 37  cm (Height might vary according to size of the socks)
• Waterproofing Intact:Wading in water less than the sock height
• Water Ingress Imminent:Wading in water more than sock height  if a secure Drylock seal of is not maintained on your feet
• Riding in Rain:Always wear waterproof rain pants to avoid water trickling down inside the socks

Read Before Use

• When the H2Go Waterproof Socks are worn in a humid climate, the user might experience a degree of sweat condensation inside the socks. This is natural and does not affect the waterproof performance of the socks.
• This product is classified as an undergarment. No size exchange, no returns on this product.
• Drylock Watertight Barrier will prevent water ingress as long as a secure seal is maintained on your feet.

Warranty:

• The H2Go Pro Waterproof Socks have a warranty of 6 months from the date of delivery.

• Wash & Care for H2Go Pro Waterproof Socks
• Hand wash only
• Do not machine wash
• Wash inside out
• Shake off any surface dirt
• Avoid hot water
• Avoid powder detergent
• Scrub and rinse gently till clean
• Drip dry naturally inside and then outside
• Store in a cool dry ventilated place, away from direct sunlight
• Do not store while damp or wet
• Dry completely before storage
• Clean thoroughly before long-term storage

About  Rynox:
Rynox is a premium brand that delivers quality motorcycle apparel and luggage. As a brand Rynox believes ” Quality is not an act. It is a habit”. Protection, Comfort, Reliability and Style have been the pillars of the brand and helped them deliver practical, reliable, stylish, and no-nonsense products.

The post Rynox H2GO Evo Waterproof Socks – Black Blue first appeared on kmmonline.

Product Description: Introducing the all-new Vapour Pro Performance Base layer – Lower. Motorcycling is an intense sport that’s mostly sweaty, tiring and drains your body. To help keep you fresh and comfortable through the day, we made performance base layers that are perfect not only for motorcycling, but for all outdoor sports.

Features:

Breathable:

• The shell ensures rapid moisture vapour transmission through garments, thus making any physically strenuous activity comfortable.
• The fabric is 100% breathable making any physically strenuous activity comfortable.

UV Protection: Protects you from harmful UV rays

Anti – Bacterial: The antimicrobial properties of the Vapour Pro help destroy/suppress the growth of bacteria and resists foul odour due to sweat

Materials and Constructions:

• Composition – The shell is made from 90% Polyamide and 10% Elastane perfect for Indian weather on a motorcycle.
• Made for Motorcycling – The Base Layer is engineered, cut and sized to be worn specifically under riding pants.

4 Way Stretch:

• For better comfort and motion on your rides and other outdoor activities  4 way stretch fabric has been  used for vapour Pro Baselayers
• Get greater freedom of motion and durability for your activities

Comfort:

Moisture Wicking:

• Vapour Pro fabric has the ability to pull moisture away from the skin using tiny, built-in capillaries.
• This process is what helps keep you cool, even as you sweat.
• Seamless Knitting – To eliminate chafing caused by friction of seam stitching

Modulayer:

• Performance Base layers are independent layers that can be worn under your riding gear and helmet.
• They are specifically designed for motorcycling but can be used as base layers for other sports and outdoor activities.

Dry Tech Performance:

• Outdoor activities are generally strenuous, which result in a lot of sweating. The Vapour Pro is designed to dry quickly and make you feel comfort in hot and humid conditions
• Feel fresh in any condition, reduce the visibility of sweat patches, and better regulate body temperature

Increased Visibility: Increased Low Light Visibility – Retro-reflective panels

Wash and Care:

Step 1 – Prep

• Shake off any surface dirt
• Flip inside out

Step 2 – Which Detergent?

• Use (in order of preference)
• Purpose-made tech-wash
• Neutral unscented liquid detergent
• Woolen liquid detergent
• Baby shampoo
• Completely Avoid
• Any type of granular powder detergent
• Any type of heavily scented liquid detergent

Step 3 – Soak

• Dissolve 1 cap of detergent, in a bucket of lukewarm water.
• Soak for at least 30 minutes
• Avoid hot water. Test with your fingers first. If it’s too hot for your fingers, it’s too hot for your gear.
• While soaking, make sure to fill the inside of the socks with the detergent water, and then leave the Base Layer to soak for 30 minutes

Step 4 – Wash and Rinse

• Keep the Base Layer flipped inside out
• Agitate and scrub gently with your hands
• Repeat until clean
• Rinse multiple times until free of detergent
• Avoid using brushes
• Flip the Base Layer the right side out and repeat the wash and rinse process

Step 5 – Let Dry and Store

• Flip the Base Layer inside out. Hang dry in a cool ventilated shaded area.
• Once the inside is dry, flip the Base Layer the right side out. Hang dry in a cool ventilated shaded area.
• Once completely dry, store in a cool, ventilated moisture-free place, away from house-dust
• Do not wring. Do not tumble dry. Do not iron. Do not bleach. Do not expose to direct sunlight while drying.

Warranty: The Vapour Pro Performance Base layer – Lower have a warranty of 6 months from the date of purchase/delivery.

Size Chart:

About Rynox:

Rynox is a premium brand that delivers quality motorcycle apparel and luggage. As a brand Rynox believes ” Quality is not an act. It is a habit”. Protection, Comfort, Reliability and Style have been the pillars of the brand and helped them deliver practical, reliable, stylish, and no-nonsense products.

The post Rynox Vapour Pro Performance Base Layer – Lower first appeared on kmmonline.

Product Description: Introducing the all-new Vapour Pro Performance Base Layer – Upper. Motorcycling is an intense sport that’s mostly sweaty, tiring and drains your body. To help keep you fresh and comfortable through the day, we made this performance base layer; which is perfect not only for motorcycling, but for all outdoor sports.

Features:

Breathable: The shell ensures rapid moisture vapour transmission through garments, thus making any physically strenuous activity comfortable. The fabric is 100% breathable making any physically strenuous activity comfortable.

UV Protection: Protects you from harmful UV rays

Anti – Bacterial: The antimicrobial properties of the Vapour Pro help destroy/suppress the growth of bacteria and resists foul odour due to sweat

Materials and Constructions:

• Composition – The shell is made from 90% Polyamide and 10% Elastane, perfect for Indian weather on a motorcycle
• Made for Motorcycling – The Base Layer is engineered, cut and sized to be worn specifically under a riding jacket

4 Way Stretch:

• Get the maximum freedom of movement and durability for your active lifestyle
• For better comfort and motion on your rides and other outdoor activities  4 way stretch fabric has been  used for vapour Pro Baselayers
• Get greater freedom of motion and durability

Fit and Comfort:

Moisture Wicking:

• Fabric has the ability to pull moisture away from the skin using tiny, built-in capillaries. This process is what helps keep you cool, even as you sweat
• Vapour Pro fabric has the ability to pull moisture away from the skin using tiny, built-in capillaries.
• This process is what helps keep you cool, even as you sweat
• Seamless Knitting – To eliminate chafing caused by friction of seam stitching

Modulayer:

• Performance Base layers are independent layers that can be worn under your riding gear and helmet.
• They are specifically designed for motorcycling but can be used as base layers for other sports and outdoor activities.

Dry Tech Performance:

• Outdoor activities are generally strenuous, which result in a lot of sweating. The Vapour Pro is designed to dry quickly and make you feel comfort in hot and humid conditions
• Feel fresh in any condition, reduce the visibility of sweat patches, and better regulate body temperature

Other Features: Long Sleeve With Thumbhole – Keep your sleeves from rolling up. Which helps you stay comfortable during outdoor exercises

Wash and Care:

Step 1 – Prep

• Shake off any surface dirt
• Flip inside out

Step 2 – Which Detergent?

• Use (in order of preference)
• Purpose-made tech-wash
• Neutral unscented liquid detergent
• Woolen liquid detergent
• Baby shampoo
• Completely Avoid\Any type of granular powder detergent
• Any type of heavily scented liquid detergent

Step 3 – Soak

• Dissolve 1 cap of detergent, in a bucket of lukewarm water.
• Soak for at least 30 minutes
• Avoid hot water. Test with your fingers first. If it’s too hot for your fingers, it’s too hot for your gear.
• While soaking, make sure to fill the inside of the socks with the detergent water, and then leave the Base Layer to soak for 30 minutes

Step 4 – Wash and Rinse:

• Keep the Base Layer flipped inside out
• Agitate and scrub gently with your hands
• Repeat until clean
• Rinse multiple times until free of detergent
• Avoid using brushes
• Flip the Base Layer the right side out and repeat the wash and rinse process

Step 5 – Let Dry and Store:

• Flip the Base Layer inside out. Hang dry in a cool ventilated shaded area.
• Once the inside is dry, flip the Base Layer the right side out. Hang dry in a cool ventilated shaded area.
• Once completely dry, store in a cool, ventilated moisture-free place, away from house-dust
• Do not wring. Do not tumble dry. Do not iron. Do not bleach. Do not expose to direct sunlight while drying.

Warranty: The Vapour Pro Performance Base Layer – Upper have a warranty of 6 months from the date of purchase/delivery.

Size Chart:

About  Rynox:
Rynox is a premium brand that delivers quality motorcycle apparel and luggage. As a brand Rynox believes ” Quality is not an act. It is a habit”. Protection, Comfort, Reliability and Style have been the pillars of the brand and helped them deliver practical, reliable, stylish, and no-nonsense products.

The post Rynox Vapour Pro Performance Base Layer – Upper first appeared on kmmonline.

Performance

Dupont Sorona Fill: Dupont Sorona is a revolutionary high-performance bio-tech polymer extracted renewably from plants.
Warmth & Insulation: The 3D spiral structure of the Dupont Sorona fill aids in superior heat preservation.
Long Lasting Performance: The strength and resilience of the Dupont Sorona fill ensures long service life of the jacket.
Stretch & Recovery: Dupont Sorona fibers have superior flexibility and shape retention. This gives you freedom to move on the motorcycle and ensures that the jacket does not become baggy and loose over time.
Friction Free Shell: Use of feather finish Nylon on the exterior and interior of the jacket reduces friction and gives you superior mobility.

Construction

Made for Motorcycling: The jacket is engineered, cut and sized to be worn easily under a riding jacket.
Independent Destination Jacket: The Surge can also be worn as an independent winter jacket.
Collapsible Hood: Tuck the hood away while riding, or wear the hood under your helmet. The collapsible hood gives you the freedom to decide.
Pre-Curved Arms: Ideally pre-curved for the riding posture, the snugger fit of the arms ensures the sleeves don’t bunch up when worn under a riding jacket.
Uniform Insulation for Longer: Diamond quilting pattern stabilizes insulation and prevents sagging of fill over time
6 Panel Hood: Strategically developed 6 panel design makes the hood compact and ergonomic. Prevents loss of heat through the head.

Comfort

Hand Warmer Pockets: Easy to access zippered hand warmer pockets will keep your hands warm when you take a break and take off your gloves.
Sleek Cuffs and Hem: Elasticated cuffs and hem ensure the Surge stays in place when worn under a riding jacket.
High Collar: When closed completely, the high collar and the hood snugly cover your face like an insulated balaclava
Zipper Garage: prevents chafing of the chin and adds comfort.

Extremely Lightweight: Weighs only 300 gms

Size Chart:-

The post Rynox-Surge Winter Jacket first appeared on kmmonline.

The Swarm Winter Jacket is purpose-built to be worn under a riding jacket on a motorcycle, so that you never need to slow down when the temperature goes down.

To stay warm when riding in winter, the trick is to layer-up and block body heat by using slim, light but insulated layers.  The Swarm Winter Jacket is equipped with an extremely lightweight and insulated Dupont Sorona fill and has a slim fit so you can wear it under your riding jacket.

Description:-

Performance

Dupont Sorona Fill: Dupont Sorona is a revolutionary high-performance bio-tech polymer extracted renewably from plants.

Warmth & Insulation: The 3D spiral structure of the Dupont Sorona fill aids in superior heat preservation.

Long Lasting Performance: The strength and resilience of the Dupont Sorona fill ensures long service life of the jacket.

Stretch & Recovery: Dupont Sorona fibers have superior flexibility and shape retention. This gives you freedom to move on the motorcycle and ensures that the jacket does not become baggy and loose over time.

Friction Free Shell: Use of soft finish Nylon on the exterior of the jacket reduces friction and gives you superior mobility.

Construction

Made for Motorcycling: The jacket is engineered, cut and sized to be worn easily under a riding jacket.

Independent Destination Jacket: The Swarm can also be worn as an independent winter jacket.

Pre-Curved Arms: Ideally pre-curved for the riding posture, the snugger fit of the arms ensures the sleeves don’t bunch up when worn under a riding jacket.

Uniform Insulation for Longer: Parallel quilting pattern stabilizes insulation and prevents sagging of fill over time

Comfort

Hand Warmer Pockets: Easy to access zippered hand warmer pockets will keep your hands warm when you take a break and take off your gloves.

Sleek Cuffs and Hem: Elasticated cuffs and hem ensure the Swarm stays in place when worn under a riding jacket.

Extremely Lightweight:Weighs only 240 gms

Waranty:- 6 Months Handled by Team Rynox

Size Guide:-

The post RYNOX SWARM WINTER JACKET first appeared on kmmonline.

The H2Go Rain Jacket is purpose-built with one single objective, to keep you dry when you are riding in the rain.

As much as motorcyclists love riding in the monsoons, we hate getting wet even more. We want to experience the lush greenery, the wet tarmac and the smell of fresh Earth that monsoon brings; but we want to do it dry. The H2Go Rain Jacket is the answer.

Description:-

Performance

• 10000mm Water Resistance: The shell is made from a fabric rated for water resistance up to 10000mm, perfect for Indian monsoons on a motorcycle.
• Double Ripstop Polyester: The Double Ripstop weave of the abrasion-resistant polyester shell prevents small tears from spreading and lengthens the life of the jacket
• Hi-Viz Green Shell: When it rains heavily, visibility typically goes down. The hi-viz green shell of H2Go keeps you visible to oncoming traffic.
• Retro-Reflective Trims: Sometimes, you need to continue riding after dark. The retro-reflective trims light up in the headlight of oncoming traffic and keep your visible

Construction

• Made for Motorcycling: The jacket is engineered, cut and sized to be worn easily over a riding jacket.
• Independent Destination Jacket: The H2Go can also be worn as an independent rain jacket.
• Pre-Curved Arms: Ideally pre-curved for the riding posture, the snugger fit of the arms reduces wind resistance and prevents fatigue.
• Heat Sealed Seams: Precision sealed seams prevent ingress of water at the seams and keep you dry.
• YKK Aquaguard Zipper: 100% waterproof YKK Aquaguard zipper, backed by a wide gutter flap lets you wear the jacket easily and keeps you dry once the jacket is zipped up.
• 3 Panel Hood with Cord Lock: 3 panel design makes the hood compact and ergonomic. Cord Lock lets you cinch the hood to your preference.
• Independently Actuating Hood:  The hood actuates independent of the collar and provides more flexibility for head movement

Comfort

• Rear Exhaust Vents: Inverted rear exhaust vents on the shoulder blades assist in removal of hot and humid air from inside the jacket, and keep you cool and dry.
• Cord Lock On Hem: Cord Locks on the bottom, on either side, let you adjust the fit of the jacket to your preference.
• Gloves Friendly Cuffs: Elasticated cuffs with forearms wide enough to fit over gloves lets you easily pull the sleeves of H2Go over your riding jacket and gloves.
• High Collar: Height of the collar designed to prevent capillary water ingress while riding, from under the chin of the helmet.
• Extremely Lightweight: Weighs only 200 gms

Other Features

• Stow-away Pouch: Sleek drawstring pouch lets you store the rain jacket during transport

Wear over a Riding Jacket

• Rynox H2GO Pro 2 Rain Jacket is primarily designed and sized to be worn over a riding jacket. To wear the H2Go over a riding jacket, select the same size as the size of your riding jacket

Wear Directly Over Body

• If you intend to wear the H2Go exclusively without a riding jacket, we recommend selecting 1 size smaller than the size of your riding jacket. Alternatively, refer to the size chart of any of our jackets, pick your size of the riding jacket, and then select 1 size smaller for the Rynox H2GO Pro 2 Rain Jacket.

Points to Note

• The H2Go Rain Jacket is engineered to be worn over a riding jacket. The cut, shape, and paneling of the H2Go Rain Jacket work best in your favor only when worn over a riding jacket.
• While the Rynox H2GO Pro 2 Rain Jacket can be worn directly over the body, its cut, shape, and paneling are not optimized to be worn in such a way

Warranty:- 6 Months, handled by Team Rynox

Sizing guide for the RYNOX H2GO RAIN JACKET:

The post Rynox H2GO Pro 2 Rain Jacket Hi Viz Green first appeared on kmmonline.

100% Waterproof hydrophobic polyurethane that comes with a breathable layer which helps in sweat and condensation management.

Description (H2Go Pro Waterproof Socks):

The H2Go Pro Waterproof Socks are engineered for a singular purpose, to keep your feet dry when you are riding in rain on the highway or crossing a river in the mountains

Riding in the monsoon is an amazing experience, but no one likes wet feet. Wet feet dampen your spirits. Dry feet let you immerse yourself in your adventure.

Now, with H2Go Pro Waterproof Socks, defy the elements and experience ultimate dry comfort

Size Chart:

1. Height of socks: 40 cm

• Height of drycore waterproof membrane: 30 cm

Performance:

• Dry core Waterproof Technology: A 100% waterproof hydrophobic polyurethane (PU) membrane sandwiched between the inner and the outer layers keeps water out. Rated for water resistance of > 5,000mm (Hydrostatic Head Test)
• Breathable Construction: The same Dry core waterproof membrane that keeps water out assists in sweat and condensation management. The specialized construction of the waterproof membrane passively allows water vapor to diffuse through but prevents water ingress; keeping you dry and cool at the same time
• MODULAYER Performance Layering System: Essentially, the H2Go Pro Waterproof socks are a modular, independent waterproof layer for your feet. Unlike the integrated waterproof membrane in waterproof boots, you now have true freedom to choose when and how to add a waterproof layer

Materials and Construction:

• Made for Motorcycling: The length/height of the H2Go Pro Waterproof socks are designed specifically to be worn with even the tallest protective motorcycle boots and keep your shin and calf free from chafing against the boot entry
• Tough Outer Layer: Made from a specialized blend of nylon, polyester, and Spandex, the outer shell is designed to resist wear and increase the service life of the socks
• Coolmax Inner Layer: Made from a specialized blend of Coolmax, polyester and Spandex, the inner layer is designed for maximum comfort and blister-free use
• Coolmax is highly moisture-wicking and breathable and helps you beat the heat

Comfort:

• Compression Fit: Ergonomically molded knit with 4-way stretch ensures the socks stay in place on your feet while providing an active fit

Waterproof, not Watertight

• Length/Height of the Socks: 40 cm (top of the entry to the corner of heel)
• Length/Height of Drycore Waterproof Membrane:30 cm
• Waterproofing Intact: Wading in water less than 30 cm deep
• Water Ingress Imminent: Wading in water more than 30 cm deep
• Riding in Rain: Always wear waterproof rain pants to avoid water trickling down inside the socks

Read Before Use

• When the H2Go Pro Waterproof Socks are worn in a humid climate, the user might experience a degree of sweat condensation inside the socks
• This is natural and does not affect the waterproof performance of the socks
• This product is classified as an undergarment. No size exchange, no returns on this product

Wash & Care for H2Go Pro Waterproof Socks

• Hand wash only
• Do not machine wash
• Wash inside out
• Shake off any surface dirt
• Avoid hot water
• Avoid powder detergent
• Scrub and rinse gently till clean
• Drip dry naturally inside and then outside
• Store in a cool dry ventilated place, away from direct sunlight
• Do not store while damp or wet
• Dry completely before storage
• Clean thoroughly before long-term storage

Warranty:- 6 Months, Warranty Handled by Team Rynox

The post RYNOX H2GO Waterproof Socks first appeared on kmmonline.